Silage Fork (P/N 0289/0290/0291/0292/0293)
• Tapered high tensile tines are designed to penetrate silage bales easily.
• European tines manufactured to the highest quality standards.
• Straight conus II tine with coned nut.
• Category 1 linkage with cat 2 bushes.
• 12 Month Warranty against faulty materials and workmanship
Specifications
| Tine Length (Total) | Useable Length | Nett Weight | Lift Capacity |
| 810mm | 680mm | 77kg | 1000kg |
| 980mm | 850mm | 80kg | 1000kg |
| 1100mm | 970mm | 81kg | 1000kg |
| 1250mm | 1120mm | 85kg | 1000kg |
| 1400mm | 1270mm | 88kg | 1000kg |
- Lifting capacity to be used only as a guide and is based on the load being evenly distributed over the tines at all times.
- Extra tines available upon request
— Further Details —
Silage Fork (P/N 0289/0290/0291/0292/0293)
The silage fork has the same frame as the Round Bale Fork but instead of the welded 50mm
K1045 tines, it is fitted with welded Conus II sleeves and bolt on Conus II silage tines. These
types of tines are narrower and more tapered than the 2” bale fork tines. This allows them to
pierce into a bale more effectively whilst still having a similar lift capacity. This makes them ideal
for use with tighter silage bales. The tines also have a bit more spring in them which means if they are
overloaded they tend to spring back into place. Being a bolt in tine makes them much easier to replace should
one get damaged. There are various tine lengths available – 810mm, 980mm, 1100mm, 1250mm and
1400mm straight tines. It is fitted with Cat 1 pins and Cat 2 bushes.
Weight approximately 110kg.
