Berends Offset Linkage – Medium Duty
A very popular medium duty linkage offset disc plough. Hard wearing, easy to use and affordable.
• Designed for small to medium size tractors.
• Popular cultivation tool used to break up soil for preparing crops or controlling weeds. Discs can cut up and mix in trash,
are very hard wearing, long lasting and easy to use.
• Fitted with 28mm (1 1/8”) square high tensile gang bolt axles and high quality triple sealed bearings.
• 14 – 18 plate models (pictured above) fitted with 75 x 75 x 6mm double beam whilst 10 – 12 plate models (pictured
below) are fitted with main single beam and angle support bracket
• Cat 1/2 linkage.
• Clamped on by U-bolts for simple adjustment.
• Bellota Boron discs are manufactured under strict quality specifications that ensure the right hardness and uniformity
throughout the disc. This includes clamp hardening to prevent distortion, lathe turning of the edges and hardened to
50HRc for low wear and long life
Download Berends Offset Linkage – Medium Duty Brochure
Download Berends Offset Linkage – Medium Duty Operators Manual
A robust, medium duty linkage offset disc plough designed for years
of hard work with minimum maintenance. Australian made using
high quality European Bellota discs.
* Bellota offer a total guarantee against material and workmanship during the normal life of the discs
— Further Details —
Berends Linkage Offset
This medium duty offset disc is designed for small to medium size tractors. They are
fitted with 28mm (1 1/8”) square high tensile gang bolt axles and high-quality triple
sealed bearings. The 10, 12, 14 and 16 plate machines have four bearings whilst the
18 plate has 6 bearings. The 10 and 12 plate models are supplied with a single boom
main frame with a support bar between the gangs whilst the
14-18 plate are supplied with a double boom main frame.
Adjustment is very simple, the U–bolts which clamp the
gangs on are simply loosened, and the gangs can be adjusted laterally and for
angle. The standard set up for the offset discs is the front gang running at a 21°
angle whilst the rear gang is set at 23°. There is an art to setting up a disc, but if you
have lateral and full angle adjustment, like our discs have, you are able to set a disc
to give a level finish. 10 plate machines are fitted with 18” x 4mm scalloped discs, 12
plates with 20” x 4mm scalloped discs and the remainder are fitted with 22” x 5mm scalloped discs. Other
sizes and types of discs are available on request. Each machine takes approximately 2.5-3HP per disc to pull,
depending on conditions.
| Prod No. |
|
|
| 0247 | 10 Plate – 18″ x 4mm scallop discs | |
| 0248 | 12 Plate – 20′ x 4mm scallop discs | |
| 0249 | 14 Plate – 22′ x 5mm scallop discs | |
| 0250 | 16 Plate – 22′ x 5mm scallop discs | |
| 0252 | 18 Plate – 22″ x 5mm scallop discs |
